บริษัท โฟร์โทรนิคส์ เทคโนโลยี จำกัด Tel 02-053-8308, 02-914-2075 , MB : 086-331-2488 Fax : 02-914-4747 E-mail:[email protected]

เครื่องมือวัดความหนาสีเคลือบ Coating Thickness Gauge ComBi D3

฿0.00
Combin D3 คือเครื่องทดสอบ หรือเครื่องวัดความหนาสีเคลือบ แบบที่ไม่ทำให้ชิ้นงานเสียหาย และสามารถวัดได้ทั้งวัสดุพื้นที่เป็น โละ และที่ไม่เป็นโลหะ
  • หมวดหมู่ : เครื่องวัดความหนาสีเคลือบผิว Coating thickness
  • รหัสสินค้า : 000801

รายละเอียดสินค้า เครื่องมือวัดความหนาสีเคลือบ Coating Thickness Gauge ComBi D3

เครื่องมือวัดความหนาสารเคลือบผิว ComBi D3®

เครื่องวัดความหนาสีเคลือบผิว หรือสารเคลือบผิว รุ่น ComBi D3 เป็นเครื่องที่ออกแบบเพื่อผู้ใช้งานใช้งานง่าย เข้าถึง เมนูได้สะดวกรวดเร็ว การเปลี่ยนค่า จัดเก็บข้อมูลเร็วและง่าย ขนาดของเครื่องกระทัดรัด สะดวกในการควบคุมขณะทำการตรวจสอล หรือทดสอบชิ้นงาน แสดงผลการวัดรวดเร็ว เที่งตรงแม่งยำ

คอมบาย D3 สามารถวัด สารเคลือบที่ไม่เป็นสนามแม่เหล็กได้ทุกชนิด เช่น สารสังเคระห์ สารเคลือบแล็คเกอร์ สารเคลือบวานิช สารเคลือบทองแดง สารเคลือบโครเมียม สารเคลือบสังกะสี ที่เคลือบอยู่บนวัสดุที่เป็นเหล็ก หรือวัสดุเทียมเหล็ก และยังสามารถวัดสารเคลือบผิาที่ป้องกันการนำไฟฟ้า เช่น เคลือบแล็คเกอร์ เครือบสารสังเคราะห์ เคลือบวานิช เคลือบแก้ว เคลือบยาง ที่เคลือบอยู่บนวัสดุ เช่น ทองแดง อลูมิเนียม ทองเหลือง

คุณลักษณะของเครื่อง 

  • * ง่ายต่อการใช้งาน
  • * ช่วงวัดกว้าง - 0 to 3.5 mm
  • * ความแม่นยำและเที่ยงตรงสูง
    * ค่าการวัด ± (1 µm + 2%) from 0 - 999 µm
    * ค่าการวัด ± 3.5% from 1000 - 3500 µm
  • * การวัดสามารถทำได้ทั้งแบบ วัดแบบจุด และ แบบต่อเนื่อง
  • * แรงการสั่นสะเทือนไม่มีผลต่อการวัด
  • * มีเครื่องป้องกันการกระแทกหัววัดทับทิม
  • * หน่วยการวัดมีให้เลือก µm/mm or mils
  • * เปิด/ปิดเครื่อง ได้ทั้งแบบมือ และ แบบ auto
  • * มีการเตือน เมือการวัดค่าเกิน ช่วงการวัดของเครื่อง
  • * การใช้งานได้ด้วยมือเดียว 
  • * ง่ายต่อการตั้งค่าการวัด ด้วยเมนูที่เรียบ ง่าย
  • * ไม่จำเป็นต้อง ปรับตั้งทดสอบเครื่องสำหรัการวัดวัสดุที่ไม่เหมือนกัน
  • * มีร่องสำหรับการวัดรูปทรงที่เป็นรูปโค้ง ทรงกลม ทรงกระบอก 

Coating thickness gauge ComBi D3®

Combined coating thickness measurement on ferrous and non-ferrous substrates

The gauge allows the user to make all the necessary adjustment with the aid of a menu - changes can therefore be implemented quickly and simply with a minimum amount of fuss. These features as well as others, make the practical hand-held pocket-sized gauge an indispensable aid in the quest for quality control and other applications, where ease of use and high-speed measurements with impeccable accuracy are desired.

ComBi D3® measures all non-magnetic coatings such as synthetics, lacquers, enamels, copper, chromium, zinc, etc. on steel or iron and all isolating coatings such as lacquers, synthetics, enamels, paper, glass, rubber, etc. on copper, aluminium or brass. This includes eloxal coatings on aluminium as well.

Characteristics

  • Easy to use
  • Large measuring range - 0 to 3.5 mm
  • High accuracy:
    ± (1 µm + 2%) from 0 - 999 µm
    ± 3.5% from 1000 - 3500 µm
  • Measurement type - single-point or continuous
  • Vibrations do not influence the measurement
  • Wear resistant, spring-loaded ruby probe
  • Measurement result can be displayed in µm/mm or mils
  • Gauge can be switched on/off manually or automatically
  • Visual alarm if the coating thickness exceeds the maximum range
  • Integrated probe - for single-handed use
  • Easy set-up - just follow the menu
  • Requires no timely re-calibration for different materials
  • The V-groove assists in the placement of the probe on spherical surfaces (eg. rods, pipes, etc.)